Solar power water pump also hand pumps over 350 feet

Advanced Energy Group - We can help you utilize solar power for your remote site, residential or commercial project.

Develop the potential of solar power with confidence!
Get high quality equipment, expert technical support and excellent pricing.

Hand Pump or Solar Powered 12v Motor Driven Water Pump

Model 100 - high quality hand or solar power motor driven water pump Can be added to your well as a back up pump!

Easily fits inside your existing well casing
along side your existing submersible pump!

Highly effective for
emergency water or remote sites.
Pump by hand or use solar powered 12 volt motor

We highly recommend this pump for either an emergency water pump for your existing well or as a remote site water pump for wells with common 2" through 8" casings. Fresh water can be easily pumped from as deep as 300' by hand. The hand effort required from a typical depth of 100' is only 13 pounds of child-like downward force for 3 gallons per minute.

The Model 100 pump self-primes - is frost proof - and can deliver water at up to 100 psi which allows your home pressure tank to be charged by hand to get water right from the spigot or use a reservoir.

Click this image to see close-up of pump head construction. This device is extremely high-precision. Many of our customers call us after they receive it just to tell us how impressed they are with its quality. Precision built, simple installation and very affordably priced. This is the best answer to your water concerns.

This unit installs in your well along side your existing pump for emergency water.
It can also be used as a primary pump for remote sites.

****Click Here****
for 12v Motorized Pumping Information

Adobe Acrobat Reader
Download example pump installations in PDF format 100K - Click here

Download installation instructions 265K - Click here

Use your Visa or Master Card

High-precision machined parts Retrofit well cap included with your order
High-precision CNC machined, and the pump kit includes a new well cap for your well.

Click to see Hand Pump Assembly Parts List (pop-up window)

Click to see Pump Cylinder and how it works! (pop-up window)

Construction Features

Easily fits inside your existing well case beside your existing submersible pump system. Can be used as a stand-alone pump in as little as a 2 inch well casing or as a secondary system in 4 inch or greater casings.

100 percent CNC machined in an aerospace quality manufacturing facility in the United States by experienced craftsmen for absolute quality control. Five year warranty on materials and workmanship.

The pump body features corrosion-resistant high-grade stainless steel construction in a freeze-resistant design for years of trouble-free use. Comes standard with a powerful 24" high-grade aluminum lever handle. The pump is designed to be functional for the next 50 years to assure you of ready access to your own reliable fresh water during any power emergency.

Easy to install; most owners can do it themselves with no special tools. With the schedule 80 PVC pipe and the compact pump cylinder a typical 100 foot installation is easy and can be completed in an hour by two people.

Hand Pump Selections

Click to see pump selections (pop-up window)
The most popular "lever handle" pump kit (Model 100L) comes complete with all necessary upper installation components: Submersible stainless steel pump cylinder, a 2", 4", 5", 6" or 8" well casing cover with clamp flanges, and the upper pump/spigot assembly with lever action for only $700 plus well cover. An optional large capacity pump cylinder (Model 125L) is $50 more and increases flow rate up to 70 percent in shallower applications of 125 feet or less.

A "no lever handle" version (Model 100) is available for when all pumping will be motorized by the optional gear motor and there is no need or desire for the lever handle assembly. Model 100 is $550 plus well cover.

Drop Pipe Sections

The Drop Pipe Kit includes a 1" schedule 80 PVC pipe with coupling, Delrin rod guide, and one 80,000 psi fiberglass pump rod with integral stainless steel fittings. Each drop pipe kit is sold in 9' lengths for $35. U.P.S. limits packages to 9' in length, and we want a rod guide about every ten feet, therefore we offer the drop pipe kits in 9' lengths. Example: If an installation requires the pump to be at 60', then seven 9' kits (7 x 9 = 63') are needed, one of which is the required "top pipe" section which is slightly different than the standard sections.

Click link to see color image (pop-up window) of Drop pipe kit section.

Call 936-264-4873

Five Year Warranty:

Manufacturer's warranty includes all parts of the system for a five year period to be free of defects in materials and workmanship. They will replace any component that is defective.

Maximum flexibility. Pump by hand or attach the 12 volt motor option
and use solar power - as little as a 10 watt panel for emergency water.
See details that follow.

solar power for your water pump Solar4Power

****Click Here****
for 12v Motorized Pumping Information

Price List and Ordering Information
for Hand and Motorized Pumping
What information do you need to order your pump?

Specify which pump kit. Either a 100L with lever action or the 100 - for motor pumping only. For any pump model you can also request the optional large pump cylinder (#125) which increases the flow rate up to 70 percent in shallower depths of about 100 feet or less.

Specify your well cover size. Just tell us what size your well case is and whether you have existing pump piping coming through your cover. Some electric pump systems bring the pressure piping below ground to your house. This is commonly referred to as a "Pitless Adapter". To measure your well case you can wrap a tape around it and divide by 3.14 to get the outside diameter. The case size is 3/8 to 5/8" less than this measurement . 2" case = 2.38 OD, 4" = 4.50 OD, 5" = 5.56 OD, 6" = 6.62 OD, 8" = 8.62 OD . The 4" cover has an additional 1" port and 1" NPT threaded port and the plugs to block them if not used. The 5" through 8" covers has an additional 1-1/4" port and 1" NPT threaded port and the plugs to block them if not used.

Indicate the total depth you intend to pump from and any additional vertical lift. Specify the total number of drop pipe section kits. Remember that 20 feet into your static water level is all that is normally necessary unless your recovery rate is less than the expected output from the pump you order. Your total well depth is unimportant. We can advise you on this if you have any questions.

For motorized pumping:
Specify the gear motor option. The 1/5 H.P. motor assembly is referred to as the 105GM.

Pitless Adapter
In very cold climates it may be desirable to discharge the water into underground piping rather than from the upper spigot. The pitless adapter enables discharge into underground piping, so no water reaches the surface where extreme cold can be problematic.

Part #	Description	Price
100L	Lever Handle hand pump with standard pump cylinder	700.00
100	Pump with no lever action assembly	550.00
125 PIT	Option: Larger pump cylinder increases flow rate (in shallower wells) Option: Pitless Adapter to discharge water under ground	50.00 200.00

105GM	Bolt-On 12 volt 1/5 HP gear motor unit.	650.00
109DPT	9' drop pipe kit with rod and guide for top section (one required)	35.00
109DP	9' drop pipe kit with rod and guide for remaining drop pipe length - specify number of these 9' kits to achieve total depth.	35.00ea.
109R	9' fiberglass rod. (spare part- not needed with order)	20.00
100RG	Delrin Rod Guide (spare part - not needed with order)	4.00
C2	2" Well cover	65.00
C4	4" Well cover	75.00
C5	5" Well cover	75.00
C6	6" Well cover	85.00
C8	8" Well cover	100.00
SP	Special cover (or call for other custom sizes/features)	Quoted

**Typical Hand Pump Order**
This would be a complete hand pump system to fit a 6" case with auxiliary port for the existing AC pump. This example system will provide 63 total feet of drop pipe (7 x 9’)
and will pump 3+ gallons per minute.
Quan.	Part#	Description	Price
1	100L	Lever Handle Pump and Cylinder	$700.00
1	C6	6 inch well cover	75.00
1	109DPT	(Required) Top 9' Drop Pipe Section	35.00
6	109DP	Standard 9' Drop Pipe Sections	210.00
		TOTAL (before shipping).	$1,020.00

Shipping Information:

The pump system is shipped via United Parcel Service ground transportation unless otherwise requested. Shipping costs vary depending on the total items ordered and from state to state. A typical hand pump order of about 100 feet will run about $130 depending on the location. We provide the shipping cost amount when you order your pump.

Call 936-264-4873 to order your water pump.

Adobe Acrobat Reader
Download example pump installations in PDF format 100K - Click here

Download installation instructions 265K - Click here

This is a high quality pump offering an effective solution for
emergency water or remote site pumping.

Simple. Effective. Reliable. Affordable.

Works with existing well-pump or as stand alone pump.

Contact us for more information or to order yours.

Of all the things important, nothing is more important than your water.

Visa and Master Card accepted