BATTERY CHARGERS

Return to store index

 

 
Iota

The DLS Series Charger/Power Supply uses switch-mode technology to insure service free operation even when subjected to extremely harsh conditions. The clean DC output operates radios and televisions without causing annoying static or snow. Pumps, motors, lights and fans operate perfectly for prolonged life. They feature regulated converter/power supply, tight line-load regulation, two-step voltage switch, current limiting, transient voltage protection and short circuit/over-current protection. The DLS maintains the batteries, only putting into the battery what is required by load or self-discharge, cutting back to milliamps as the battery requires. All models include cooling fan. Charger efficiency approx. 85%. Two-year warranty.
 

Description List Price Our Price

Add to Cart

DLS15 Battery Charger Model 12V 163.90 134.10

DLS30 Battery Charger 12V 218.90 179.10

DLS45 Battery Charger 12V 251.90 206.10

DLS55 Battery Charger 12V 295.90 242.10

DLS75 Battery Charger 12V 610.50 499.50

Model

Output Voltage

 Output  Current

Input Voltage

Dimensions LxWxH

Weight (lbs)

DLS15

13.6/14.2 VDC

15A

120VAC

7.0" x 6.5" x 3.5" 4.0

DLS30

13.6/14.2 VDC

30A

120VAC

7.0" x 6.5" x 3.5" 5.5

DLS45

13.6/14.2 VDC

45A

120VAC

7.0" x 6.5" x 3.5" 5.5

DLS55

13.6/14.2 VDC

55A

120VAC

10.0" x 6.5" x 3.5" 5.5

DLS75

13.6/14.2 VDC

75A

120VAC

10.0" x 6.5" x 3.5" 7.8
 

Controller  The IQ Smart Controller offers automatic charging control for the DLS Series Chargers to provide longer and safer use of the system’s battery. IQ4 controllers feature an installation jack plug which plugs into the dual voltage jack on the top of the DLS unit. The IQ Controller allows the DLS charger to operate as an automatic 3-stage smart charger. For 12V only. Two-year warranty.
 

Description List Price Our Price

Add to Cart

IQ4 Controller for DLS Series 41.80 34.20

Model

Dimensions

Weight

IQ4 Smart Controller

3.06" x 1.88" x 1.44"

 1 lb


Auto Transfer Switches The IOTA ITS-30 and 50R are relay-based automatic transfer switches and the ITS-75C is contactor based . They provide switching between two separate power sources and can be used in conjunction with another ITS transfer switch for additional power sources.

Safely connect a generator to your home or office. Safely connect an inverter and an AC generator to the same house wiring. These automatic transfer switches can be used with inverters that don't have built-in transfer switch capability. If the generator is not running, then the inverter is connected to the load wiring. When the generator is started, the load wiring is automatically disconnected from the inverter and connected to the generator. A time delay feature allows the generator to warm up +/- 30 seconds before the transfer takes place. These units permit simple connection of a fueled generator to a home or office panel for safe transfer from/to the main supply.

These automatic transfer switches are also useful in RV and Marine installations where both the hot and neutral terminals must be switched. They can be used between an inverter and a generator, between an inverter and shore power, or a generator and shore power. Two transfer switches can be used if switching between all three power sources is desired.

Indoor rated housings have conduit or connector knockouts on all four sides. 30A and 50A units have a plastic housing. ETL listed to UL1008
 

Description List Price Our Price

Add to Cart

ITS30R Transfer Switch 30A 104.50 85.50

ITS50R Transfer Switch 50A 247.50 202.50

ITS75C Transfer Switch 75A 649.00 531.00

Model

Max Power Cord Size

Max Generator

Max Main Breaker

Case Material

Wiring

Dimensions

Weight (lbs)

ITS-30R

30A

4kW

30A 1P

Plastic

Hard Wire

7.5" x 8.5" x 4"

2

ITS-50R

50A

12kW

50A 2P

Plastic

Bridge

7.5" x 8.5" x 4"

3

ITS-75C

75A

18kW

75A 2P

Steel

Lugs

8.0" x 12" x 4"

11.6