SWITCH GEAR
|
Connect Energy |
|||
|
PV System Combiner Box: The PCB10 is designed to combine multiple PV source circuits into one output circuit. This combiner allows up to10 fused input circuits in a lockable, conduit-ready and rainproof 3R enclosure. PCB10 combiners are UL listed for 12, 24 or 48 VDC PV systems, maximum open circuit voltage of 125VDC. Each combiner circuit can accept up to 15 amp fuses, type MDA or ABC with the maximum combined PV source circuit current rating of 64 amps. Each input circuit is ZNR surge protected and will accept #10AWG conductors including ground bar. The positive and negative outputs are equipped with dual rated #1/0 AWG lugs. |
|||
| Description | List Price | Our Price |
Add to Cart |
| PCBF-10 10A Fuse | 1.32 | 1.08 | |
| PCBF-15 15A Fuse | 1.32 | 1.08 | |
| PCBF-5 5A Fuse | 1.32 | 1.08 | |
| PCBF-6 6A Fuse | 1.32 | 1.08 | |
| PCBF-8 8A Fuse | 1.32 | 1.08 | |
| TCB6 6 Circuit Combiner Box | 218.90 | 179.10 | |
|
OutBack Power Systems |
|||
|
PV array
combiner:
The PSPV Power System PV
Array Combiner provides series over current protection of PV module
circuits allowing NEC compliant installation. Includes space for up to
twelve 125 VDC rated breakers or eight 600 VDC rated fuse holders.
Includes two positive output bus bars with two #1/0 terminals for single
or dual output circuits. The type 3R outdoor rainproof enclosure can be
mounted vertically or inclined to 14 degrees. Enclosure only without
breakers or fuses. |
|||
| Description | List Price | Our Price |
Add to Cart |
|
PSPV Power System PV, (2) Positive output bus bars w/2 #1/10 terminals. outdoor enclosure |
152.90 | 125.10 | |
|
|||
|
PV Array Breakers for PSPV : DIN rail snap-in mount with #2 AWG setscrew type compression terminals. UL listed. Maximum of twelve breakers. Approved for two wires per terminal. Ten-year warranty. |
|||
| Description | List Price | Our Price |
Add to Cart |
| OBPV-6 PV breaker 6 amp 125 VDC with #2 AWG set screw terminals | 13.20 | 10.80 | |
| OBPV-9 PV breaker 9 amp 125 VDC with #2 AWG set screw terminals | 13.20 | 10.80 | |
| OBPV-10 PV breaker 10 amp 125 VDC with #2 AWG set screw terminals | 13.20 | 10.80 | |
| OBPV-15 PV breaker 15 amp 125 VDC with #2 AWG set screw terminals | 13.20 | 10.80 | |
| OBPV-30 PV breaker, 30 amp | 13.20 | 10.80 | |
|
|||
|
Fuseholder 600 VDC for PSPV maximum of eight fuse |
|||
| Description | List Price | Our Price |
Add to Cart |
| USM-1 Fuseholder - 600V for PSPV | 16.50 | 13.50 | |
|
Fuses 600 VDC, 13/32 x 1.5 fast acting 100,000A interrupt rating. |
|||
| Description | List Price | Our Price |
Add to Cart |
| KLKD6 Fuse 6 amps | 13.20 | 10.80 | |
| KLKD10 Fuse 10 amps | 13.20 | 10.80 | |
| KLM12 Fuse 12 amps | 27.50 | 22.50 | |
| KLM20 Fuse 20 amps | 27.50 | 22.50 | |
|
|||
|
PSSB Combiner: Specifically designed to work with Sunny Boy inverter systems. The PSSB allows connection of up to six low voltage sub-arrays in series to form a high voltage PV array. Each sub-array can have a maximum open circuit voltage of 100 VDC. Includes one segmented 600 VDC breaker assembly, with space for one additional OBSP-15 or a dual pole AC breaker for the Sunny Boy output. Eliminates the hazards of wiring high voltage PV arrays. Aluminum, rain-tight, NEMA 3R outdoor enclosure. |
|||
| Description | List Price | Our Price |
Add to Cart |
| PSSB Combiner for Sunny Boy. Aluminum NEMA 3R enclosure. | 273.90 | 224.10 | |
| OBSB-15 Segmenting Breaker Assembly, 6 pole 15A-100V DC/pole | 121.00 | 99.00 | |
| PSSB-MP Mounting Panel for PSSB | 108.90 | 89.10 | |
|
OutBack-DC power systems |
|||
|
PSDC Enclosure: The PSDC indoor enclosure is designed to integrate the DC over current protection and wiring needs of inverter/battery, PV charging systems and DC load distribution. Removable side panels allow for direct DC wiring access for up to 4 FX or 2 SW/DR inverters. The PSDC includes mounting provisions for up to ten small (0.75 wide) and six medium (1 wide) or four large (1.5 wide) DC breakers. Charge controllers can be installed directly on top of the enclosure, or side mounted by adding a charge controller bracket (CCB). Includes one 500-amp/50mV shunt, battery breaker, one combined ground/negative terminal bus bar and one isolated positive bus bar, 3/4, 1 and 2 knockouts. Forest green powder coated steel. ETL listed. |
|||
| Description | List Price | Our Price |
Add to Cart |
|
PSDC-250 Power System DC disconnect w/ amp breaker, meter shunt & bus bars |
570.90 | 467.10 | |
|
PSDC-175 Power System DC disconnect w/ amp breaker, meter shunt & bus bars |
570.90 | 467.10 | |
| PSDC-100 Power System w/100A up to 4 inverters | 504.90 | 413.10 | |
| PS2DC-250 Power System DC w/250A breaker for up to 2 inverters | 423.50 | 346.50 | |
| PS2DC-175 Power System DC w/175A breaker for up to 2 inverters | 423.50 | 346.50 | |
| PS2DC-100 Power System DC w/100A breaker for up to 2 inverters | 357.50 | 292.50 | |
|
DC Circuit Breaker 125 VDC: The PSDC holds a maximum of four large 1.5 breakers, six medium 1 breakers or ten small .75 breakers. The Amps Interrupt Capacity, AIC, rating is in accordance with UL 489. 125 VDC. |
|||
| Description | List Price | Our Price |
Add to Cart |
| OBDC-250 DC breaker 250 amp 125 VDC with 3/8 inch stud terminals | 130.90 | 107.10 | |
| OBDC-175 DC breaker 175 amp 125 VDC with 3/8 inch stud terminals | 130.90 | 107.10 | |
| OBDC-100 DC breaker 100 amp 125 VDC with 1/4 inch stud terminals | 64.90 | 53.10 | |
| OBDC-60 DC breaker 60 amp 125 VDC with 1/4 inch stud terminals | 31.90 | 26.10 | |
| OBDC-40 DC breaker 40 amp 125 VDC with 1/4 inch stud terminals | 31.90 | 26.10 | |
| OBDC-30 DC breaker 30 amp 125 VDC with 1/4 inch stud terminals | 27.50 | 22.50 | |
| OBDC-20 DC breaker 20A, 125VDC small size-0.75 in wide | 27.50 | 22.50 | |
| OBDC-15 DC breaker 15 amp 125 VDC with 1/4 stud terminals | 27.50 | 22.50 | |
| OBDC-10 DC breaker 10 amp 125 VDC with 1/4 inch stud terminals | 27.50 | 22.50 | |
|
|||
|
Charge Controller Bracket: Allows up to two OutBack MX60 controllers or three Xantrex C-Series to be mounted on either side of the PSDC enclosure with matching knockouts (up to three MX60, C-series or two RVPP Solar Boost units can be top mounted on the PSDC without the CCB). |
|||
| Description | List Price | Our Price |
Add to Cart |
| CCB Charge Controller Bracket | 42.90 | 35.10 | |
|
OBDC-GFP/2 DC Ground Fault Protection System:
The DC-GFP/2 is required by the NEC
for PV arrays mounted on residential dwelling roofs. It can be used with
the PSDC or PSR. It protects wiring and system components for one or two
PV arrays up to 60 amps at 125 VDC maximum. Requires three small breaker
spaces in the PSDC. Includes a ground bus bar, neutral and ground
connection wiring and mounting hardware. UL listed for a maximum of 125
VDC. |
|||
| Description | List Price | Our Price |
Add to Cart |
| OBDC-GFP/2 DC Ground Fault Protection system for PV arrays | 141.90 | 116.10 | |
|
|||
|
Terminal and Ground Bus Bars: Use for adding more wire terminations or for isolating multiple positive/negative circuits. All models have three #1/0 to 14 AWG and eight #6 to 14 AWG compression screw terminals (no ring lugs require |
|||
| Description | List Price | Our Price |
Add to Cart |
| TBB Terminal Bus Bar with plastic insulators and mounting screws | 20.90 | 17.10 | |
| TBB-R Terminal Bus Bar with Red Insulators | 20.90 | 17.10 | |
| TBB-W Terminal Bus Bar with White Insulators | 20.90 | 17.10 | |
| GBB Ground Bus Bar with mounting screws | 20.90 | 13.50 | |
| OutBack AC power systems | |||
|
PSAC Enclosure : The PSAC indoor enclosure is designed to integrate the AC over current protection wiring needs of input/output from inverter/generator systems and AC load distribution. Removable side panels allow for direct AC wiring access for up to 4 FX or 2 SW/DR inverters. The PSAC includes two brackets with DIN rail mounts for up to eight Square-D QOU type AC breakers on each bracket. Includes one AC output bypass breaker assembly, a separate ground, isolated neutral and hot terminal bus bar standard. Space is available to install an optional X-240 auto transformer and additional AC input/output/bypass breaker assemblies. Forest green powder coated steel. ETL listed. |
|||
| Description | List Price | Our Price |
Add to Cart |
| PSAC-100Q Power System AC disconnect w/quad 100A AC IOB assembly for 4 inverters | 658.90 | 539.00 | |
| PSAC-60D Power System AC disconnect w/dual 60A AC IOB assembly for 2 inverters | 489.50 | 400.50 | |
| PSAC-60Q Power System AC disconnect w/quad 60A AC IOB assembly for 4 inverters | 603.90 | 494.10 | |
|
PSAC-60 Power System AC disconnect with AC input/output/bypass breaker |
405.90 | 332.10 | |
|
PSAC-30 Power System AC disconnect with AC input/output/bypass breaker |
368.50 | 301.50 | |
| PS2AC-50D Power System AC disconnect w/dual 50A AC-IOB assembly for up to 2 inverters | 412.50 | 346.50 | |
|
|||
| Circuit Breakers OBAC' type | |||
| Description | List Price | Our Price |
Add to Cart |
| OBAC-50 AC breaker 50A, 120VAC OutBack-0.5 in wide | 16.50 | 13.50 | |
| OBAC-30 AC breaker, 30A, 120VAC OutBack-0.5 in wide | 27.50 | 22.50 | |
| OBAC-20 AC breaker 20A, 120VAC OutBack-0.5 in wide | 16.50 | 13.50 | |
| OBAC-15 AC breaker 15A, 120VAC OutBack-0.5 in wide | 16.50 | 13.50 | |
| OBAC-50D AC breaker 50A,120/240V 2 pole OutBack-1 in wide | 38.50 | 31.50 | |
| OBAC-30D AC breaker 30A, 120/240VAC, 2 pole OutBack-1 in wide | 38.50 | 31.50 | |
| OBAC-25D AC breaker 25A, 120/240 VAC, 2 pole OutBack-1 in wide | 38.50 | 31.50 | |
| OBAC-20D AC breaker 20A, 120/240 VAC, 2 pole OutBack-1 in wide | 38.50 | 31.50 | |
| OBAC-15D AC breaker 15A, 120/240 VAC 2 pole OutBack-1 in wide | 38.50 | 31.50 | |
|
|
|||
|
Circuit Breakers QOU type: UL listed, 120/240 VAC, 48VDC, single pole QOU breakers feature a Visi-trip indicator and are intended for flush or surface mounting with reversible lugs, or DIN rail mount. Includes mounting feet for convenient panel attachment. Wire lug size accepts #14 to # 2AWG. |
|||
| Description | List Price | Our Price |
Add to Cart |
| QOU10, 10amp Circuit Breaker | 19.25 | 15.75 | |
| QOU15, 15amp Circuit Breaker | 19.25 | 15.75 | |
| QOU20, 20amp Circuit Breaker | 23.65 | 19.35 | |
| QOU30, 30amp Circuit Breaker | 23.65 | 19.35 | |
| QOU40, 40amp Circuit Breaker | 23.65 | 19.35 | |
| QOU60, 60amp Circuit Breaker | 23.65 | 19.35 | |
| QOU30-2, 30amp Circuit Breaker, 2 pole | 42.90 | 35.10 | |
| QOU60-2, 60amp Circuit Breaker, 2 pole | 42.90 | 35.10 | |
|
|||
|
AC Input/Output/Bypass Assemblies - PSAC: Packed as a complete kit with detailed instructions and drawings. Includes safety interlock. Allows bypassing of an inverter for maintenance or repair while maintaining power to AC loads supplied from a generator or utility grid. Includes single and 2-pole QOU circuit breaker, safety interlock, wire, mounting screws and service lug. |
|||
| Description | List Price | Our Price |
Add to Cart |
| AC-IOB-60 AC Input/Output/Bypass breaker assembly 60 amp 120 VAC | 93.50 | 76.50 | |
| AC-IOB-60D AC Input/Output/Bypass breaker assembly 60 amp 120 VAC | 174.90 | 143.10 | |
| AC-IOB-30 AC Input/Output/Bypass breaker assembly 30 amp 120VAC | 93.50 | 76.50 | |
|
AC-IOB-30D AC Input/Output/Bypass breaker assembly 30 amp 120/240 VAC |
174.90 | 143.10 | |
| AC-IOB-100Q AC in/out/bypass breaker assembly quad 100A, 120/240VAC, 4 invtrs 6.5 in wide | 240.90 | 197.10 | |
|
|||
|
PSMP Mounting Plate and PSA Inverter Adapter for the PSDC and PSAC : The PSMP is a two-piece power system mounting plate, pre-drilled, for PSAC and PSDC and up to four FX or two SW or DR inverter/chargers. Split in half for UPS shipping. Forest green powder coated steel. Includes fasteners. The PSA adapts the side opening of a PSAC or PSDC to match the PS series inverter/charger. |
|||
| Description | List Price | Our Price |
Add to Cart |
| PSMP Mounting Plate for PSDC and PSAC | 196.90 | 161.10 | |
| PS2MP Mounting Plate PS2DC/PS2AC based systems for up to 2 inverters | 141.90 | 116.10 | |
|
|
|||
|
Lightning
Arrestors: Silicon Oxide Varistor (SOV)
lightning surge arrestors can handle high current surges that are too
large for an MOV or capacitor. They provide protection to electrical
equipment by reducing problems due to lightning strikes or power surges.
Surge arrestors react in as little as five nanoseconds and begin to
conduct when voltage rises above the nominal line voltage after a specific
time delay and handle an unlimited number of surges. The waterproof case
is designed to install into a 1/2 knockout opening. Includes 18 long
#12AWG wires. UL listed |
|||
| Description | List Price | Our Price |
Add to Cart |
| LA302DC DC Lightning Arrestor, up to 250VDC | 44.00 | 36.00 | |
| LA602DC DC Lightning Arrestor, up to 600VDC | 44.00 | 36.00 | |
| LA302R AC Lightning Arrestor, up to 300VAC | 39.60 | 32.40 | |
|
Surge Capacitors: Surge capacitors help prevent damage to sensitive AC electrical equipment by controlling high voltage surges too light or fast for a surge arrestor. They react continually with a slight voltage increase and no delay. Includes 18 long-#12/2 wire |
|||
| Description | List Price | Our Price |
Add to Cart |
| AC Capacitor, 125/250vac | 60.50 | 49.50 | |
| Arrestor Mounting Bracket | |||
| Description | List Price | Our Price |
Add to Cart |
| Side Mount Lightning Arrestor Bracket | 3.30 | 2.70 | |
| Top Mount Lightning Arrestor Bracket | 9.90 | 8.10 | |
|
|
|||
|
Fuses |
|||
|
Fuse Block System - ATO/ATC : This fuse block system features a stylish, clear insulating cover that protects conductive parts and includes label recess for marking. Tin-plated copper buses allow 30 amp fuse rating per circuit, 100A max rating per block. Two styles -6 circuit with/without NEG bus, less fuses. |
|||
| Description | List Price | Our Price |
Add to Cart |
| 5025 6 circuit w/neg bus Fuse Block System ATO/ATC | 29.70 | 24.30 | |
| 5028 6 circuit Fuse Block System ATO/ATC | 26.40 | 21.60 | |
|
|||
|
Fuse Holder In Line , ATO/ATC: For direct in line wiring for one type ATO/ATC fuse holder rated 30A max, with 4 #12AWG lead wires. |
|||
| Description | List Price | Our Price |
Add to Cart |
| 46021 In Line Fuse Holder ATO/ATC Fuse holder | 2.72 | 2.25 | |
| 46019 Fuse Cover Clear | 1.38 | 1.13 | |
|
Fuse Holder Water Resistant: ATO/ATC Sealed, weather resistant body and cap with mounting tab for one type ATO/ATC fuse, rated 30 amp max. with 8 x #12AWG lead wires. |
|||
| Description | List Price | Our Price |
Add to Cart |
| 46033 Water Resistant Fuse Holder | 5.50 | 4.50 | |
|
Fuses Blade Type ATO/ATC: Automotive standard 1/4 blade fuses for use in marine, RV and other systems with 12/24V DC circuits (32V max) |
|||
| Description | List Price | Our Price |
Add to Cart |
| ATO-1 1 amp Black | 0.33 | 0.27 | |
| ATO-2 2 amp Gray | 0.33 | 0.27 | |
| ATO-3 3 amps Violet | 0.33 | 0.27 | |
| ATO-5 5 amps Tan | 0.33 | 0.27 | |
| ATO-7.5 7.5 amps Brown | 0.33 | 0.27 | |
| ATO-10 10 amps Red | 0.33 | 0.27 | |
| ATO-15 15 amps Lt. Blue | 0.39 | 0.32 | |
| ATO-20 20 amps Yellow | 0.39 | 0.32 | |
| ATO-25 25 amps Natural | 0.39 | 0.32 | |
| ATO-30 30 amps Lt. Green | 0.39 | 0.32 | |
|
|||
|
SEA Fuse Block System: The most economical system for 100-300 ampere fusing for use with 12/24V DC systems. Features red glass filled nylon base with 5/16 non-ferrous studs supplied with two protective terminal boots for wiring up to #2/0 AWG |
|||
| Description | List Price | Our Price |
Add to Cart |
| 5001 SEA Fuse Block System | 22.00 | 18.00 | |
|
|||
|
SEA Fuses For 12/24 VDC systems. Interrupt capacity 2000 Amps. |
|||
| Description | List Price | Our Price |
Add to Cart |
| 5103-150A SEA Fuse | 9.90 | 8.10 | |
| 5105-200A SEA Fuse | 9.90 | 8.10 | |
| 5107-250A SEA Fuse | 9.90 | 8.10 | |
| 5108-300A SEA Fuse | 9.90 | 8.10 | |
|
|||
|
Powerhouse Fuse Blocks Class T: Powerhouse inverter fuse blocks provide safe and reliable over current protection for DC loads connected to battery systems of 12, 24 or 48VDC. This one size fits all fuse block holds Class T fuses (sold separately) from 100 to 400 amps and includes heavy-duty set screw lugs for up to #4/0 cable with a removable protective cover. |
|||
| Description | List Price | Our Price |
Add to Cart |
| PH-FB Class T Fuse Block, fuses sold separately | 38.50 | 31.50 | |
|
|||
|
Class T Fuses For use on Powerhouse fuse blocks, rated 160VDC max. UL rated for DC service. Fast short-circuit response. |
|||
| Description | List Price | Our Price |
Add to Cart |
| 5112 Class T Fuse 110 amps | 19.80 | 16.20 | |
| 5116 Class T Fuse 200 amps | 20.90 | 17.10 | |
| 5119 Class T Fuse 300 amps | 42.90 | 35.10 | |
| 5121 Class T 400 amps | 42.90 | 35.10 | |
|
|||
| Circuit breakers AC/DC | |||
|
Toggle Circuit Breakers-AC/DC: Toggle circuit breakers combine switching and circuit protection needs for 12/24/48 VDC systems. Typically used for DC charge or load circuits rated 65 VDC/277V AC max. All are single pole magnetic action in a phenolic case with screw terminals Compact size allows for less area consumed on DC panel assemblies 0.75 x 2, toggle is red color. UL, CE recognized. |
|||
| Description | List Price | Our Price |
Add to Cart |
| 7205 Toggle Circuit Breaker 10A | 18.70 | 15.30 | |
| 7209 Toggle Circuit Breaker 15A | |||